present

WORLD 1 ST INNOVATIVE MULTIPLE USE

LADDER ATTACHMENTS


Designed in Australia – patent No. 2008281329

Gold Medal Winner - Tiapei International Invention Show & Technomart.
Highlighted on the Worksafe website soapbox.

Devices that anchors (rung type) ladders, before you climb, in 95% of situations. Preventing deaths & serious injuries occurring world wide is our target, simply by securing the ladder before climbing.

In the last 5 years over 80 people have died, 180+ have suffered major trauma and 4500+ have been hospitalised due to ladder accidents. For further statistics on ladder accidents follow this link.

This device which will fit 95% of ladder access points (as listed below) is attached to the desired rung and then placed on/in its anchor point before you start climbing i.e. The ladder is secure, there is no backward or sideways movement.
It has some angle adjustment to suit the rake of a roof, carport or pergola.

design 1


SLE 700

This bracket is designed to fit most eave gutters. The bracket when attached to the required rung and clamped (as the SLE 800) then becomes part of the ladder system, allowing it to be extended into its position for work to be carried out or access to work area.
Once the bracket is clamped to the rung no further adjustment is required. To remove from gutter push ladder forwards and upwards.

Download PDF Flier

Below is a video of thw SLW 700 being used in situation. In little under a minute you have a ladder secured to the gutter and are ready to start safe work.

Watch

 design 2


SLE 900

RUNG LOCK

This bracket is designed to fit on appropriate rung of the ladder once the ladder is extended to its working position.
The bracket will allow slight movement if the rungs try to disengage.
design 3


SLE 800

This bracket is designed to extend from 130mm to 250mm in its normal position.
By reversing the slider bar this bracket reduces from 130mm to 20mm.
The bracket becomes a handy unit for the purpose of access to existing factory parapets, pipe works, steel portals, purlins or any other areas where the ladder needs to be secure before climbing. Once placed in position the slider bar is set to required width and clamped.

Download PDF Flier

The SLE 800 has many and varied uses for anyone working with ladders, beams, purlins, etc. The following video goes through a few of the best ways to utilise your brackets.

Watch

Product Information
1.6mm Steel
Powder Coated
Weight: 2.5kg
Slip Resistant Rubber Pads

IMPORTANT NOTE

These brackets are designed to attach to the required rung of the ladder and clamped before being placed in position for access work.
This eliminates the problem of the ladder not being secured at the top before climbing.

FOR MORE INFORMATION ON THESE PRODUCTS

Phone Borsel Enterprises on 0434 942 280 or email: borselenterprises@gmail.com
and

Download our product flier


Watch out for our ebay store opening soon.


SLE 700

Action 01
SLE 900

Action 02
SLE 800

Action 03

You need Acrobat Reader to view any documents on this site. Click here for a free download.